Raymond mill, also known as Raymond mill, is a relatively mature milling equipment. It has the advantages of stable structure, convenient operation and strong processing capacity. It is deeply loved by users. Raymond mill can process a wide range of materials. More than 300 kinds of non-metallic, non-flammable and explosive materials with Mohs hardness below 9.3 can be effectively milled. The general working environment of Raymond mill equipment is relatively harsh, and we will do it with the advent of winter. Good winter equipment maintenance work, so why is the winter maintenance of Raymond mill equipment very important? Raymond machine manufacturers

After the beginning of winter, it is indicated that the dry climate with little rain in autumn gradually passed, and the weather began to tend to rainy and cold. The vegetation is withered, the sting insects are dormant, and the activities of all things tend to stop. With the arrival of winter, the weather is getting colder and colder. Generally, the outdoor working temperature of Raymond machines is lower. When we use Raymond mills, we must preheat the equipment. When the temperature is lower than too low, the oil and lubricant in the temperature-changing box should be replaced with low-temperature antifreeze lubricant in time to prevent the lubricant from being frozen and damaging the equipment when the temperature is too low. Regarding the oil level of the reducer, the degree of looseness of the triangle band, and the degree of wear of the gears, ensure the normal operation of the machine. Replace parts and add lubricants in time. The equipment needs to run for a while to allow the lubricating oil to be fully lubricated before it can be fed, so as to reduce the wear to a low point.

In addition to regular maintenance, Raymond pulverizer equipment has a very important connection with the ability of the operator, because Raymond pulverizer is not a small machine that anyone can operate. Although the operation is simple, Raymond pulverizer In the event of an emergency, inexperienced people cannot handle it correctly, which may lead to dangers and potential safety hazards. It may even endanger the safety of the operator, so be sure to choose the operator of the equipment carefully. After the equipment is installed in our factory, the operators will be trained to master the relevant knowledge, and the Raymond mill can be operated only after being qualified. Electromechanical part: pay attention to whether there is oil in the cleaning pump and whether the screws are loose. Check whether there is oil in the reducer of the mixer and whether the screws are loose. The air compressor and the conveying part of the conveyor belt should be refueled regularly to maintain the oil level, and check whether the travel switch and solenoid valve are damaged before starting. Transmission part: the transmission chain, the bearing of the dehydrator is greased once a month, the bearing of the central shaft is greased once every three months, and the slider is refueled once a week to prevent rust.

The above is why it is said that the winter maintenance of Raymond mill equipment is very critical. I hope that it can be helpful to everyone when using Raymond mill equipment.